Cleaning up after a renovation happens in two stages. First the contractor cleans up the work area: debris out, plastic sheeting taken down, a thorough vacuum and wipe. In a house built before 1978 where paid work disturbed old paint, federal rules spell out exactly how that cleanup is done and checked. Then comes the detailed final clean, done by you or a cleaning crew once every trade is finished. Clean from the top down with a HEPA vacuum and damp cloths, never by dry sweeping or dusting. Keep the heating system's registers sealed and the system off until the dust is gone, and change the filter afterward. If children live in the house and the work disturbed old paint, think about a dust-lead test before they move back into the rooms.
This is general information, not a lead inspection or legal advice.
Why renovation dust is not ordinary dust
Sanding joint compound, cutting into plaster, refinishing floors and sawing tile all make a lot of very fine dust. It drifts through door gaps, settles on every surface, gets inside cabinets and gets pulled into ductwork if a forced-air system is running. A broom mostly moves it around.
Two kinds of dust deserve extra care in Philadelphia's older rowhomes and twins:
- Lead dust. Many houses here were built long before 1978, when lead-based paint was banned for homes, and old layers often survive under newer paint on trim, windows, doors and stairs. The City's lead prevention guide warns that home repairs like sanding or scraping paint can create dangerous dust. Our guide to lead paint and repainting an older home covers the work itself; this article is about what's left afterward.
- Silica dust. OSHA's silica page says respirable crystalline silica is created by cutting, sawing, grinding and drilling stone, concrete, brick, block and mortar, and links it to silicosis, lung cancer and other diseases. Cutting stone, opening up a brick party wall, grinding out old mortar and basement concrete work all produce it.
Who cleans what: contractor or cleaner
A contract that never says what "clean" means is an argument waiting to happen. Before work starts, put these points in writing:
- daily cleanup of the work area, and how dust will be kept out of the rest of the house;
- who hauls away debris and packaging, and where it goes;
- what the contractor's final cleanup includes: just "broom clean," or vacuuming, wiping and washing floors in the work area;
- whether a separate final clean is part of the price or up to you.
If you hire a separate crew for the final clean, schedule it after the contractor's cleanup, not instead of it.
Pre-1978 homes: the lead-safe cleanup is the contractor's job
When a paid job disturbs painted surfaces in a pre-1978 home, EPA's Renovation, Repair and Painting rule generally applies, with exemptions for small jobs (see 40 CFR 745.85 and EPA's Renovate Right pamphlet). For covered jobs, the cleanup is part of the work, not an extra:
- Paint chips and debris are collected without spreading them and sealed in heavy-duty bags. Plastic sheeting is misted and folded dirty side in.
- Inside, walls are cleaned from the ceiling down, remaining surfaces are vacuumed with a HEPA vacuum (with a beater bar on carpets and rugs), hard surfaces are wiped with damp cloths, and floors are mopped with a method that keeps wash water separate from rinse water, such as two buckets.
- A certified renovator then does a cleaning verification: windowsills, floors and countertops are wiped with wet disposable cloths and compared to an EPA cleaning verification card, and anything that fails is cleaned again. Ducts that open into the work area should have been closed and covered with taped plastic during the job.
Under 40 CFR 745.86, the firm must give the owner its records for the job, including a short description of the cleaning verification results, when the final invoice is delivered or within 30 days of finishing, whichever is earlier. Ask for that record. A house cleaner who comes in afterward is not a substitute for this step.
An optional dust-lead test
Cleaning verification is a visual comparison, not a lab test. If you want a measured result, EPA's 2026 update to its contractor guide, Steps to Lead Safe Renovation, Repair and Painting, says a homeowner can ask for post-renovation dust-lead testing in the contract. The samples are collected by a certified lead inspector, risk assessor or dust sampling technician and sent to an EPA-recognized lab. The same guide says a result at or above these levels means the area isn't ready to live in:
- floors: 5 micrograms of lead per square foot;
- window sills: 40 micrograms per square foot;
- window troughs: 100 micrograms per square foot.
EPA's advice is to decide this before the job starts: write into the contract that testing will be done, who will do it, and whether the contractor re-cleans if a sample fails. In Pennsylvania, lead inspectors and risk assessors are certified by the Department of Labor & Industry, which publishes lists on its lead occupations page. Federal rules require testing mainly in housing that receives federal assistance; for most owner-occupied homes it's your choice. If you rent the house out, Philadelphia's lead certification rules for landlords also apply, as our lead paint guide explains.
When to do the final clean
Timing saves you from cleaning twice:
- After the last dusty task. If the painter is still sanding between coats or the electrician still has to cut in a box, wait. One more saw cut puts dust back on everything.
- After paint and finishes can take it. Check the label on paint, floor finish and grout for the cure time before you scrub or put rugs back.
- Before furniture, rugs and boxes come back. Clean rooms are much easier when they're empty, and anything you move in collects the dust that's still settling.
How to clean it, step by step
- Bag the debris first. Pick up offcuts, packaging and chips by hand or with a HEPA vacuum. Don't dry-sweep fine dust into the air. Big loads of debris are a disposal question; our guide to bulk trash and construction debris in Philadelphia covers the options.
- Use a HEPA vacuum, not the household one. Federal lead rules define a HEPA vacuum as one whose last filter captures 0.3-micron particles with 99.97% efficiency, built so all the air leaves through that filter without leaking past it (40 CFR 745.83). An ordinary vacuum can blow the finest dust back out.
- Work from the top down. Ceilings and the tops of door frames and cabinets first, then walls, trim and window sills, then floors last. Dust you knock down from above lands on surfaces you haven't cleaned yet.
- Vacuum, then damp-wipe. Wipe hard surfaces with damp cloths and change or rinse them often. A cloth that's grey is spreading dust, not picking it up.
- Don't forget the hiding places. Inside cabinets and drawers, window tracks and the trough under the sash, outlet and switch plates, light fixtures, and the fins and gaps of cast-iron radiators and baseboard heaters, which trap a lot of dust in older Philadelphia houses.
- Mop with two buckets. Keep one bucket for washing and one for rinsing so you aren't spreading dirty water across the floor. Change the water often.
- Carpets and upholstery. HEPA-vacuum slowly, with a beater bar on carpet. Heavy dust in carpet may need a professional deep clean.
- Outside and next door. Check the front steps, the sidewalk, the back yard or shared alley, and your neighbor's steps and windowsills if the work was on the facade or a party wall. On a rowhome block, your dust is your neighbor's dust.
The heating system
EPA's guidance on air duct cleaning says that during construction or renovation that produces dust, you should seal off supply and return registers and not operate the heating and cooling system until after the dust is cleaned up. If the system did run during the work, replace the filter as soon as cleanup is done and check it again a few weeks later; our guide to how often to change your furnace filter explains how to read the size and rating.
Duct cleaning is rarely the answer by default. EPA doesn't recommend it except as needed, for example when ducts are clogged with excessive dust and debris, have visible mold, or have vermin in them. If you do hire a duct cleaner, EPA suggests getting written estimates from at least three providers and avoiding anyone who makes sweeping health claims.
What to put in a cleaning request
If you post the final clean as a project, these details help a cleaner give you an accurate estimate instead of a guess:
- the size of the home and which rooms or floors the work touched, including the basement and stairs;
- what the work was: drywall sanding, plaster repair, floor refinishing, tile or masonry cutting;
- the year the house was built, and whether the contractor did lead-safe cleanup and cleaning verification;
- whether you need inside cabinets, windows inside and out, carpets or upholstery done;
- the date the contractor finishes, and whether the house will be empty;
- photos of the worst rooms.
Price depends mostly on the size of the area, how much dust the contractor left and how many hidden surfaces need attention, so compare written estimates.
When to call a pro
A cleaning crew is worth it when the work touched most of the house, when you're moving back in on a deadline, or when the dust is heavy enough that you'd be cleaning for days. It's also the safer choice for anyone with asthma or other lung conditions who would be breathing the dust while cleaning.
Some situations need a different specialist rather than a cleaner:
- Old paint was disturbed in a pre-1978 home. The lead-safe cleanup belongs to the renovation firm, and a measured result comes from a certified inspector or risk assessor. A cleaning crew comes after that, not instead of it.
- Visible mold or vermin in the ducts. That's a job for an HVAC or duct cleaning company.
- A truckload of debris. Book junk removal in Philadelphia before the cleaners, not after.
When you're ready, you can describe the job once on HomeKept, with the details above and a few photos, and compare up to three estimates from local house cleaners in Philadelphia. It's free for homeowners. Ask each one what their post-construction clean includes, room by room, and compare the answers along with the price.
HomeKept is a brand of FalconAI LLC, 331 E Street Rd, Feasterville-Trevose, PA 19053.
HomeKept needs JavaScript. Please enable it and reload the page. ·
HomeKept necesita JavaScript. Actívalo y vuelve a cargar la página. ·
Для работы HomeKept нужен JavaScript. Включите его и обновите страницу.