A roof deck in Philadelphia needs both a zoning permit and a building permit from Licenses & Inspections (L&I), and the building permit needs construction plans. The quick "EZ" permit that covers many backyard decks doesn't apply, because the City's EZ deck standard says outright that a separate building permit is required for roof decks. In practice, a design professional draws the deck and checks that the roof framing can carry it, the plans go through review, and L&I inspects the work. If you want to be up there by late spring, start the paperwork in winter.
This is general information, not legal advice. Rules depend on your zoning district and your house, so confirm the details with L&I or your designer.
Why a roof deck is treated differently from a backyard deck
L&I's Start Right guide (June 2026) has a project table for homeowners. For decks more than 12 inches above the ground, it says a zoning permit and a building permit are required. A site plan and construction plans are also required when the deck is larger than 216 square feet or above the first floor. A roof deck is always above the first floor, so plans are part of the job no matter how small the deck is.
The EZ deck standard explains the limit. It only covers decks attached to an existing single-family house, in the rear yard, not above the first floor and no larger than 216 square feet. Everything else goes through regular plan review.
Zoning: where on the roof the deck can go
The Zoning Code generally allows roof decks on homes, with rules about where the deck and its access structure sit. L&I's FAQ on rooftop structures points to Table 14-701-6 and Section 14-604(5) of the Zoning Code as the places that set height, setback and area exceptions for roof decks, their railings and their access structures. The rules most homeowners run into:
- Front setback. A roof deck generally has to sit at least 5 feet back from the front edge of the building. If the top floor is already set back at least that far, no extra setback is needed.
- Pilot house. The enclosed stair or hatch housing that gets you onto the roof is called a roof deck access structure in the code, and many people call it a pilot house. In most residential districts it's limited to 10 feet above the deck surface and 125 square feet in area, and parts of it have to be set back further than the deck itself. Some denser districts are treated differently.
- Other rooftop items. The same FAQ says canopies, pergolas and solar panels on the roof have to meet the height, area and setback rules of the base zoning district unless the code gives them a specific exception. A roof over part of the deck is a design question to raise early, not something to add later.
- Overlays. Some neighborhoods have overlay districts with stricter roof deck rules, and some ban roof decks altogether. Look up your address on Atlas to see your zoning district and any overlays, and ask your designer to check them before drawing anything.
If the deck you want doesn't fit the code, it isn't automatically dead. Start Right explains that you apply for the zoning permit, get a refusal, and appeal to the Zoning Board of Adjustment. The hearing is generally scheduled within several months, and before it you must meet with the registered community organizations for your area. That adds months, so it usually pays to design within the rules.
The building permit: plans, structure and inspections
According to Start Right, building plans have to be sealed by a registered design professional, meaning an architect or engineer, unless the work is non-structural and costs less than $25,000. A roof deck adds load to the roof and gets fastened to the structure, so expect to need a sealed set of plans.
What the engineer or architect typically works out:
- whether the roof joists, and the walls they bear on, can carry people and furniture, not just snow and a roofer, and what reinforcement is needed if they can't;
- how the deck's supports reach the structure, and how each place the roof covering is pierced will be sealed;
- guards, stairs and the hatch or pilot house. For comparison, the City's EZ standard for ordinary decks calls for guards at least 36 inches high with no opening larger than 4 inches. Your roof deck's guards will be shown on the approved plans;
- anything heavy you plan to put up there. Planters full of soil, a hot tub or an outdoor kitchen change the design, so mention them at the first meeting.
Applications go in online through eCLIPSE or by appointment at the Municipal Services Building. Start Right lists a $25 filing fee for one- and two-family homes, with the rest of the permit fee due when the permit is approved. It also says that the owner, not the contractor, is the permit holder, and that every permitted job must be inspected. The City issues its certificate after the final inspection passes.
Check the roof under the deck first
A roof deck usually sits over the roof covering, so the roof under it gets harder to reach and repair once the deck is built. If your flat roof is near the end of its life, or already has soft spots or leaks, it usually makes sense to replace or repair it before the deck goes on rather than take the deck apart in a few years. Keep drains and scuppers clear of the framing so water can still leave the roof. Our guide to flat roof maintenance for Philadelphia homes explains what to look for and when a roof covering replacement needs a permit.
Neighbors: chimneys, vents and shared walls
On a rowhome block, your roof is a few feet from your neighbors' chimneys and vents. Under an L&I regulation on protecting adjoining property, when new or modified construction extends above the roofline of the building next door and that building's chimney or vent is within 10 feet, the person doing the construction must take reasonable steps to get the neighbor's chimney or vent extended or offset to meet code. The steps include written notice at least 60 days before work starts, with an offer to get the permits and fund or do the work. A pilot house is the part of a roof deck most likely to trigger this, so ask your designer early whether it applies to you.
Either way, talk to your neighbors before work starts. Our chimney inspection guide covers the same rule from the neighbor's side.
Historic districts
If your house is on the Philadelphia Register of Historic Places, alone or as part of a historic district, a roof deck needs the Historical Commission's approval as part of the building permit. See the City's page on getting approval for work on a historic property and our guide to Philadelphia historic district rules.
Why winter is the time to start
The paperwork can take longer than the building. Start Right says residential applications that need plans are generally reviewed within 10 to 15 business days, and every resubmission after comments is processed within 20 business days. Add the time for a site visit, design, a structural check and possibly Historical Commission review, plus several months if you need a zoning appeal. Starting design in November or December gives you a real chance of building in spring.
Don't pull the permit too early, though. Start Right says work must begin within six months of the permit being issued.
Who can do the work
Start Right says a homeowner who lives in the house may do most permitted work themselves. The exceptions include structural work that could affect an adjacent property or walkway, and electrical and plumbing work. A roof deck on an attached house can easily fall into the first group, and lights or outlets on the deck need an electrical permit and a licensed electrician.
For the rest, the guide says contractors working on existing homes must be registered with the Pennsylvania Attorney General as home improvement contractors. A registered contractor can work on an existing one- or two-family home in the city if they also hold a Philadelphia Commercial Activity License and the required insurance. Other work requires a Philadelphia contractor license. The guide also says the contract should state in writing who gets the permits and what the schedule is. Our guide on how to check a contractor in Philadelphia walks through the lookups.
What drives the cost
There's no reliable one-size price for a roof deck, so get written estimates for yours. What usually moves the price:
- Access. Using an existing hatch is one thing. A new stair and pilot house means cutting through the top floor and building a small structure.
- Structure. How much reinforcement the joists need, and whether the deck can rest on the bearing walls.
- The roof itself. Whether the roof covering has to be repaired or replaced first.
- Size and materials. The decking, railings and any privacy screening.
- Getting materials up. On a block without rear access, everything may have to come through the house or be lifted from the street.
- Paperwork. Design, engineering, permit fees and, if needed, a zoning appeal or historic review.
Checklist before you call anyone
- Look up your address on Atlas for the zoning district and overlays, and use the City's historic property search to see whether the house is designated.
- Photograph the roof, the hatch or top stair, the front and rear edges, and the chimneys and vents on both neighbors' roofs.
- Find out how old the roof covering is and whether it has leaked.
- Measure the roof and sketch where you'd like the deck and the access.
- List what you want up there, especially anything heavy.
- Decide whether you want one company to handle design, permits and construction, or a designer first and a builder second.
- Ask each contractor who pulls the permits and who provides the sealed plans, and get the answer in the written contract.
When to call a pro
From the start. A roof deck means sealed plans, structural decisions, holes in the roof and, on an attached house, work that can affect the neighbors. You'll want an architect or engineer for the design, a roofer if the roof needs work, and a builder who has done roof decks in the city.
When you're ready for estimates, you can post the project on HomeKept. Describe it once, with your photos and the notes from the checklist, and compare up to three estimates from local pros. It's free for homeowners, and a person reviews every pro's profile. Say in your description whether you already have plans or need someone to handle design and permits, so the estimates cover the same work.
HomeKept is a brand of FalconAI LLC, 331 E Street Rd, Feasterville-Trevose, PA 19053.
HomeKept needs JavaScript. Please enable it and reload the page. ·
HomeKept necesita JavaScript. Actívalo y vuelve a cargar la página. ·
Для работы HomeKept нужен JavaScript. Включите его и обновите страницу.