Test this winter. Pennsylvania's Department of Environmental Protection (DEP) says the best time to test for radon is the colder months, when houses are closed up, and a short-term kit from a hardware store costs about $20 to $30. Put it in the basement or the lowest level you use, keep windows and outside doors shut for 12 hours before and during the test, and mail it to the lab as soon as the test ends. If the result is 4 picocuries per liter (pCi/L) or higher, test again to confirm. If the confirmed level is still 4 or more, have a DEP-certified mitigator install a system. You may test your own home yourself, but anyone you pay to test or fix it must be certified by DEP.
This is general information, not medical or legal advice.
Why it's worth testing, even in the city
Radon is a radioactive gas from uranium in the soil. It seeps in through cracks and openings in the foundation and builds up inside, and you can't see or smell it. EPA's guide cites the Surgeon General's warning that it is the second leading cause of lung cancer in the United States, after smoking, and the risk is especially high for smokers living with high radon. DEP says about 40 percent of Pennsylvania homes are above EPA's action level of 4.0 pCi/L.
You may hear that Philadelphia has less radon than the suburbs. Don't skip the test because of it. EPA says its 1993 Map of Radon Zones should not be used to decide whether an individual home needs testing. Its Citizen's Guide to Radon adds that levels vary greatly from home to home, so your neighbor's result on the other side of the party wall doesn't settle it for your house.
City water comes from the Delaware and Schuylkill rivers, and EPA says radon in water is not usually a problem with surface water and is more likely with groundwater, such as a private well. On a well in Bucks or Montgomery County, test the air first, as EPA advises, then ask about the water.
How to test your own home
Under 25 Pa. Code § 240.2, the state's certification rules don't apply to a person testing a building they own or live in, so a store-bought kit is fine. If you are buying or selling, EPA points out that you can hire a qualified tester instead. Our rowhome inspection guide covers adding a radon test to a purchase.
Short-term tests run from 2 to 90 days, depending on the device, and DEP describes short-term kits as running 2 to 7 days. Radon varies day to day, so a short test is a snapshot. Long-term tests run more than 90 days and better show your year-round average. EPA's first step is a short-term test, and winter suits it: the house is already closed up.
Where to put the kit
EPA says to test the lowest lived-in level: the basement if you use it often, otherwise the first floor, in a room you actually spend time in, but not the kitchen or bathroom. DEP recommends the basement, where levels are often highest, so a first test there shows the worst case.
The state's testing protocol for certified testers is a good model for your own kit:
- 20 inches to 6 feet off the floor, at least a foot from the ceiling and exterior walls;
- at least 3 feet from exterior doors, windows and ventilation ducts, and out of direct airflow;
- at least 4 feet from the furnace or boiler, a fireplace and direct sunlight;
- at least 7 feet from a sump pit, and not within 10 feet of the washer and dryer;
- never in a bathroom, kitchen, closet, cupboard or crawlspace.
In a rowhome basement where the laundry, boiler and sump share one room, measure before you set the kit down.
Keep the house closed
- For a test shorter than four days, close windows and outside doors at least 12 hours before it starts. Keep them closed except for normal coming and going.
- Run the heat as usual. Don't run whole-house fans or anything else that brings in outside air. EPA says a small exhaust fan may run for short periods.
- Don't start a short test during a severe storm or high winds. The state protocol sets the limit at winds of 30 mph or more.
What your result means
EPA estimates the average indoor level at about 1.3 pCi/L and outdoor air at about 0.4. Its steps:
- First short-term result below 4 pCi/L. EPA's steps don't call for a follow-up test, but EPA says no level is safe and recommends that you consider fixing the house between 2 and 4.
- First result of 4 or higher. Test again: a long-term test gives a better year-round picture, and a second short-term test gives a quicker answer. If the first result was 8 or more, twice the action level, do the second short-term test right away.
- Decide. Fix the house if a long-term result is 4 or more. With two short-term tests, consider fixing it if their average is 4 or more.
Close to the line, short-term tests are less certain. EPA says an average of 4.1 leaves about a 50 percent chance that the year-round level is somewhat below 4. It also says most homes can be brought to 2 pCi/L or below, so a result in the 3s is worth talking over with a mitigator.
What fixing it involves
EPA says the main method is soil suction: a vent pipe from beneath the floor and a fan that pulls radon from under the house and vents it outside. It doesn't require major changes to the house, and DEP says installation should take less than a day.
Pennsylvania's installation standards for detached and attached houses up to three stories are in 25 Pa. Code § 240.308. The rules to know:
- Sealing. Where accessible, the mitigator must seal floor-wall joints, channel drains, gaps around pipes and a sump pit that lets soil gas in.
- The fan may not be installed below grade, in living space, or in a basement, crawlspace or other spot directly beneath heated or cooled rooms.
- The exhaust must end pointing upward, with no rain cap. It must be at least 10 feet above the ground and at least 10 feet from an operable window, door or other opening into living space, unless it is 2 feet above that opening. It must also be at least 10 feet from openings into the building next door. A pipe run up an outside wall must end above the roof edge, and a pipe through the roof must end at least 12 inches above its surface.
The rowhome wrinkle
An attached house has no free side walls unless it sits at the end of the row. The pipe either goes up the rear wall to above the roof edge or runs inside, through a closet or chase, and out the roof. On a row of flat roofs, the 10-foot rules about neighbors' windows, hatches and deck doors can decide where it ends. Before you sign, ask the mitigator to show you where the pipe and fan will go. If the pipe goes through a flat roof, ask who seals the opening and whether the warranty covers it. Our flat roof guide explains why every opening up there matters.
After the installation
The system must carry a "Radon Reduction System" label with the installer's name, certification number and phone, plus an attached package with the contract, warranties and maintenance instructions. The mitigator must then test the house for at least 48 hours, starting no sooner than 24 hours after finishing.
After that, the job is yours. DEP tells owners to check the U-tube manometer on the system's pipe: uneven liquid levels mean the fan is running, and even levels mean it may be off or failing, so call the installer. DEP also offers a free long-term test kit if an active system was installed within the last year and your post-mitigation result is below 4 pCi/L. Its radon in the home page explains how to apply.
What it costs
DEP's January 2025 news release put typical permanent systems at $800 to $1,200. That is a rough guide: EPA says cost depends on how the house was built and the size of the problem. Under 25 Pa. Code § 240.302, a mitigator must offer you a written estimate before the work.
If you plan to finish the basement, test before you start. EPA says radon-resistant techniques can be added cheaply during a renovation, and that you should test again once the work is done. Our guide to finishing a basement in Philadelphia covers the permits and moisture side.
Hiring a tester or mitigator in Pennsylvania
- Certification is required for anyone who tests, mitigates or analyzes radon for clients. The exemption for your own home covers you, not a contractor you pay.
- Look them up. DEP's Radon Services Directory lists certified testers, mitigators and labs by name and by county, updated monthly.
- Ask for the card. A certified pro must show you a current DEP photo ID card if you ask.
- Get results in writing, within 10 business days of the test or lab analysis.
Quick checklist
- Buy a short-term kit, or hire a certified tester, for a calm week this winter.
- Close the house 12 hours ahead and run the heat normally.
- Place the kit in the basement or the lowest level you use, away from the sump, laundry, boiler and drafts.
- Mail it to the lab the day the test ends.
- If the result is 4 pCi/L or more, confirm it, right away if it is 8 or more.
- If a confirmed result is 4 or more, get written estimates from DEP-certified mitigators.
- Before signing, agree where the pipe, fan and exhaust will go.
- Keep the post-mitigation result, check the manometer, and retest every two years.
When to call a pro
Call a DEP-certified pro when you need a result both sides of a sale will trust, when a test comes back at 4 pCi/L or higher, before you finish a basement, or when a system's manometer reads level. If the fan needs new wiring, ask who does it and whether it needs a City permit.
To find a tester, start from HomeKept's home inspection page for Philadelphia, or the pages for Bucks County and Montgomery County. Describe the job once, for example "radon test, 1920s rowhome, unfinished basement" or "radon system, confirmed 6 pCi/L, flat roof", and compare up to three estimates from local pros, free for homeowners. A person reviews every pro profile, and license or insurance badges appear only after documents are checked. That isn't a background check, so confirm DEP certification in the directory yourself, and use our contractor checklist for the rest.
HomeKept is a brand of FalconAI LLC, 331 E Street Rd, Feasterville-Trevose, PA 19053.
HomeKept needs JavaScript. Please enable it and reload the page. ·
HomeKept necesita JavaScript. Actívalo y vuelve a cargar la página. ·
Для работы HomeKept нужен JavaScript. Включите его и обновите страницу.