A GFCI is the outlet with the little TEST and RESET buttons. It watches the current going out on the hot wire and coming back on the neutral, and if some of it is going somewhere else, through a wet floor, a cracked cord or a person, it shuts the circuit off in a fraction of a second. It is one of the few safety devices in a house that you can check yourself in ten seconds.
Where they belong
Codes have added locations over the years, and each version of the National Electrical Code as adopted in Pennsylvania applies to work done under it, so an older house may legally have fewer. The places protection is expected in modern work are the wet and damp ones:
- kitchens, at the counter outlets;
- bathrooms;
- laundry areas and near utility sinks;
- unfinished basements and crawl spaces;
- garages and sheds;
- outdoor outlets;
- near pools and hot tubs.
If your kitchen or bathroom outlets have no TEST and RESET buttons anywhere, it does not automatically mean they are unprotected: one GFCI outlet, or a GFCI breaker in the panel, can protect several outlets downstream of it. Press TEST on the one you can find and see what else goes dead. Many homes have a single GFCI in a bathroom protecting the other bathroom and the outdoor outlets, which is why an outdoor outlet that is dead is so often fixed by pressing RESET upstairs.
The monthly test
- Plug a lamp into the outlet and switch it on.
- Press TEST. The lamp should go out and the button should pop.
- Press RESET. The lamp should come back on.
If pressing TEST does nothing, the device is not protecting you and should be replaced. If RESET will not hold, something on the circuit is faulting, or the device itself has failed. GFCI devices wear out, and a very old one that still passes its own test is still worth replacing when an electrician is in the house anyway. The Electrical Safety Foundation keeps homeowner guidance on this at esfi.org.
Nuisance trips
A GFCI that trips over and over is usually right. Common honest causes:
- Moisture. An outdoor outlet after rain, a basement outlet in a humid Philadelphia August, a bathroom outlet near a shower. An outdoor outlet needs an in-use weatherproof cover, not just a flap.
- An appliance with leakage. Old space heaters, a dehumidifier, a pressure washer, a window air conditioner. Unplug things one at a time to find it.
- A long run with several outlets. Small leakage from many devices adds up.
- Damage. A nicked cable, a chewed cord or a damaged plug.
A GFCI tripping together with a burning smell, a warm faceplate, or scorch marks is a different story: leave it off and call an electrician.
The part worth paying for
Adding GFCI protection to a kitchen or bathroom is usually a small job. Figuring out why one keeps tripping, or adding a circuit where there is not one, is not, and in Philadelphia the work generally belongs to a licensed electrical contractor, with a permit through Licenses and Inspections for anything more than a straight replacement.
If a breaker rather than an outlet is the thing cutting out, our post on a breaker that keeps tripping sorts out which of the three causes you are looking at. To compare prices, describe the job once and see estimates from electricians serving Philadelphia, and check the contractor before you choose.
HomeKept is a brand of FalconAI LLC, 331 E Street Rd, Feasterville-Trevose, PA 19053.
HomeKept needs JavaScript. Please enable it and reload the page. ·
HomeKept necesita JavaScript. Actívalo y vuelve a cargar la página. ·
Для работы HomeKept нужен JavaScript. Включите его и обновите страницу.